Fuel Cap Coin Mount
Ph: (407) 325-3836
Register

ADD A PIECE OF YOUR LIFE TO YOUR BIKE

ADD A PIECE OF YOUR LIFE TO YOUR BIKE

"Motorcycle Timing & Horn Cover, Fuel Door & Gas Cap, Air Cleaner, Universal & Primary Challenge Coin Mounts"

Shop By Motorcycle Brand

Thank You for Purchasing   “The Fuel Cap Coin Mount”!

Please read First: Easy Mounting Instructions:

 

1. Purchase a tube of permatex  hi temp. RTV Silicone Gasket Maker (ultra black ) from your local auto parts store.

2. Clean off your stock fuel cap cover with alcohol and remove all dirt.

3. Place “The Fuel Cap Mount” on your stock fuel cap for fit, (slot facing towards your seat)  Make sure you click the fuel cap so the fuel cap coin mount is straight and the slot is facing you

4. With rtv silicone apply 1 healthy bead in each of the channels on the underside of “the fuel Cap mount”

FILL BOTH CHANNELS  UP NICELY,  A LITTLE MORE IN THE CHANNEL IS BETTER THAN A LITTLE LESS, NOT EXCESSIVE!!

5. With the Slot facing towards your seat, place “The fuel Cap mount” on the stock fuel cap cover and press down firmly, make sure “the fuel cap mount”  sides lie flat all the way around, and along all edges

DO NOT MOVE “The Fuel cap Mount” AROUND – this will cause silicone to smear. If it smears, allow it to dry and peal off later with a straw end or something non-abrasive. 

6. you can use some masking tape or similar to steady “the fuel cap mount” from moving and allow to cure.

6. Allow silicone  in channels  to cure overnight at least 12 hours or more.

7. Next day mount coin by putting 2 dabs of RTV silicone about ½ dime size at the 3 and 9 o’clock positions. Make sure the bottom slot is clear of RTV silicone. (This slot will be used to remove your coin.)

8. Center your coin in and Wait 12 hours or more for RTV to cure. Please Do Not Wax over your coin, to clean coin use mild soap and water only.

9. Enjoy your new look, and Ride with Pride

Easy removal Instructions:

1. Use a very small thin screw driver insert in the slot and pry the coin out, you may have to use another screw driver once it loosens up to help remove coin. Be very careful not to damage “the fuel cap mount” when inserting the screw driver in the slot just twist a little and the medallion should loosen up, then pop it out.

4. Clean out the silicone, using a non sharp tool.

5. “The Fuel Cap Mount” is ready to accept another medallion, see above.

Any questions email: This email address is being protected from spambots. You need JavaScript enabled to view it. Or call Motordog69 LLC. Tel: 407-325-3836

Don’t forget to share this great motorcycle part with your friends and crew, www.motordog69.com

 

 

Shopping Cart

 x 

Cart empty

Download NEW Catalog

Adobe AcrobatDownload our new Set Screw Coin Mount Online Catalog to look over later!


Featured Products

Sign Our Guest Book!

Sign up for our FREE newsletters now!

Connect With Us

social icon social icon  social icon

 

Shop with Confidence

Pay with PayPal, Visa, MC, Amex

SSL Certificate
SSL Certificate

S5 Box

Login

Register